Power Up Your Cellular Booster - Uniden Ui15 Instruction Manual

Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
INSTALL YOUR CELLULAR BOOSTER
Install the cellular booster in a location that is properly ventilated and not
exposed to excessive heat, moisture and/or direct sunlight. The optimal area
would be on a wall located near a power outlet.
It should be mounted in an easily accessible area so it's easy to perform general
maintenance with the coaxial cable connections, dip switch settings and power
adaptor.
Make sure all cables and antennas are securely connected before commissioning
the system.

POWER UP YOUR CELLULAR BOOSTER

Once you have placed your outdoor and indoor antennas and connected all the
cables between the antennas and the booster, you are now ready to plug your
booster into its power source.
IMPORTANT
You can now make some fi nal adjustments to the antennas and cable placements to
fi ne tune your system in order to give you maximum coverage.
Note: Be sure to check the LED alarm lights on the booster to be sure your system
is working properly. Please refer to the table below for an explanation of the LED
readings.
29