Canon PowerShot SX400 IS User Manual page 213

ç Contents
Disabling Eye-Fi Transfer
Configure the setting as follows to disable Eye-Fi transfer by the
card, if necessary.
●
[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
●
Press the [
choose [Eye-Fi Settings] on the
[ ] tab, and then press the [ ]
button.
●
Choose [Eye-Fi trans.], and then
choose [Disable].
213
] button,