Canon PowerShot SX400 IS User Manual page 171

ç Contents
Screen Brightness
Adjust screen brightness as follows.
●
For maximum brightness, press and hold the [
for at least one second when the shooting screen is displayed
or when in single-image display. (This will override the [LCD
Brightness] setting on the [
brightness, press and hold the [
one second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen
normally shown when you turn the camera on.
●
Choose [LCD Brightness], and
then press the [ ][ ] buttons to
adjust the brightness.
] tab.) To restore the original
] button again for at least
●
Choose [Start-up Image], and
then choose [Off].
171
] button