Canon PowerShot SX400 IS User Manual page 141

ç Contents
●
Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
Selecting a Range
2
Choose an image.
●
Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button. [
●
To cancel selection, press the [ ]
button again. [
displayed.
●
Repeat this process to specify
other images.
3
Protect the image.
●
Press the [
A confirmation message is
displayed.
●
Press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
1
Choose [Select Range].
●
Following step 2 in "Using the
Menu" ( = 140), choose [Select
Range] and press the [ ] button.
141
] is displayed.
] is no longer
] button.