Pride Mobility SPORTRIDER SR-XL3 MVSR Owner's Manual page 18

■ Braking
Electro-magnetic brake: Release the speed control lever completely, and the electromagnetic brake
will be activated automatically, and the scooter will stop.
WARNING!
When on a gradient NEVER switch the vehicle to the freewheel mode. The electromagnetic brakes will
not be applied. This may result in serious injury or death.
■ Seat
 The seat can be turned to 45 degrees or 90 degrees.
 Push the seat adjustment lever forward and swivel seat.
 Release the lever, and then continue swiveling the seat until it locks in position.
 Attention

Return the seat to the forward position before driving.
■ How to adjust the armrest width
Loosen the knobs at the back of the seat frame. Next adjust the armrest width by sliding the armrest.
Once satisfied with the width, tighten the knobs.
■ How to re-position the seat
The distance between seat and tiller can be adjusted by repositioning the seat forward or backward.
Loosen the four bolts under the seat which is on the seat platform first, and then tighten the bolts
securely after moving the seat to the desired position.
How to set to freewheel mode
 Drive mode (Motor/Brake Engaged): Push the lever down completely, the scooter can be driven by
motor power.
 Freewheel Mode (Motor/Brake Disengaged): Pull the lever up completely, the scooter can be moved
manually.
4 . O P E R AT I O N
LEVER
User Manual (Page 18 of 30)