3.2.3.4 Adding Devices
You can manually or automatically add devices to the NVR. On the Device List Setup page, click
the Add button, the Maintain page appears.
Manually Adding a Device
Select a device type from the Device Type drop-down list, enter the device information and
click the Save button to save the settings. The device will be added to the Device List.
Automatically Adding Devices
On Figure 3-9, click the
1. Check the square beside the Device Name to select a desired device. (Note: If multiple
devices have the same ID and Password, you can select multiple devices on this step).
Figure 3-9
Auto Detection icon to switch to the Auto Detection page.
Figure 3-10
30
Elite 2 NVR8004X