Front Panel - EverFocus Elite 2 NVR8004X User Manual

1.5 Front Panel

No. Name
1 Status LED
2 Power
3 HDD Tray
4 Lock
Note: For example, if the HDD1 is installed before turning on the NVR, the HDD1 LED
indicators will emit light once the NVR is powered on. Then, if you hot-swap either one of
HDD1~4, still only the HDD1 LED indictor remains light up. You can reboot the NVR manually
and the HDD LED indication will be corrected.
1
2
4
Figure 1-2
Description
SYS: Indicates the system is working.
EXT: Indicates the NVR is connected to the external storage device or
USB dongle.
LAN1 / LAN2: Indicates the NVR is connected to the network.
HDD1~4: Indicates the internal HDD is activating, but the LED
indicators will light up only if you install the HDDs before turning on
the NVR. If the NVR is already on and you hot-swap the HDDs, the
HDD1~4 LED indicators will still remain on / off as the previous status,
please see the example in the note below.
PWR: Indicates the power is on.
Press to turn on / off the NVR.
Pull the HDD tray out to install the HDD.
Use the supplied key to lock / unlock the NVR.
3
4
Elite 2 NVR8004X