Checking The Dynamic Ip Address - EverFocus Elite 2 NVR8004X User Manual

2.5 Checking the Dynamic IP Address

You can look up the IP address and access the Web interface of the NVR using the IP Utility
(IPU) program, which is contained in the CD. It can also be downloaded from EverFocus'
Website: http://www.everfocus.com/HQ/Support/DownloadCenter_p1.aspx. Please connect
the NVR in the same LAN of your computer.
1. Install and then start the IPU program
2. IPU will automatically search the IP devices connected in the LAN. The default network
values of the IP devices will be displayed. By default, the network protocol of the IP device
is DHCP.
3. To optionally configure the Machine Name, IP Address, IP Type or Port Number using the
IPU:
a. Log in the NVR by checking the desired model and then click the Log in
Log in dialog box appears.
b. Type the Username and Password. Click the OK button, the status of the selected
camera will display Login.
Note:
1. The default user ID is admin and the default password is 11111111.
2. If you select more than one NVRs that have the same user ID / password, you will
be able to log in several NVRs at once.
. The following dialog box appears.
Figure 2-19
Figure 2-20
Figure 2-21
19
Elite 2 NVR8004X
icon. The