Led Indications - Telecast Viper II TR5900 User Manual

Fiber port
UTP port
Note for TP port cable connection:
1. Use the straight-through (NOT crossover) CAT-5 cable
Be sure of the proper wiring and the link LED status
2.
LED Descriptions
LED
TX Data
RX Data
Optical Link
UTP 1000
FDX
PWR
LED
Data TX
Fiber Link
FDX
Data RX
UTP 1000
PWR
TR5900/5950 Connections
Attach the fiber cable. The Tx, Rx fiber cable must be paired
at both ends. Singlemode fiber is recommended for 5950
Default: full duplex mode
Attach Universal twisted pair (UTP) cat-5 cable to RJ-45 port
TR5950 front panel information
Color Function
Green Blinks or lit when data is transmitting
Green Blinks or lit when data is being received
Green Lit when fiber connection is good
Green Lit when 1000base is present on UTP
Green Lit when full-duplex mode is active
Green Lit when DC power is coming up
TR5900 front panel information
Color Function
Green Blinks or lit when data is transmitting
Green Lit when fiber connection is good
Green Lit when full-duplex mode is active
Green Blinks or lit when data is being received
Green Lit when 1000base is present on UTP
Green Lit when DC power is coming up
6