User Guide
Your cameras show five permanent icons: battery power, signal strength, and a drop-down menu. If you
have a VueZone motion detection camera, you will have a fourth icon.
Gateway icon: This icon represents the gateway(s) associated with your account.
Motion sensor icon: This icon appears if your camera has a motion sensor. It is gray
when not armed, green when armed, and red when it has been triggered.
Signal strength: Indicates signal strength of the camera, relative to the VueZone
gateway.
Battery power: Indicates how much battery power you have remaining in that camera.
X
Delete - This removes a camera from your account.
Control Bar Icons
There are six controls on the toolbar: schedule recording, share camera, start/stop streaming, record
video, take snapshot, zoom, adjust brightness, and full screen/time lapse mode.
Button
Action
Start / Stop Streaming: Starts and stops video stream, or stops recording if it is
recording.
Record: Starts and stops recording video clips. The border around the video turns
red when recording is in progress. You can also see the time lapse in the top right
corner.
Snapshot: Takes still images.
Zoom: Allows you to zoom into the video by up to 4x, and zoom back out.
Brightness: There are three settings.
Full Screen: Expands the video to your full computer screen. Press "Escape" to exit
this setting.
Provide user guide feedback here
Chapter 6
Cameras Tab 10
Need help?
Do you have a question about the personal video network and is the answer not in the manual?