Iv.2 System Configuration - Prodys IP Family User Manual

IV.2 System Configuration

Grouped here are functions that affect the general operation of the unit.
<Loop>: This sets up an Encoder-Decoder loop. Its purpose is to help the
user to check audio connections before streaming. The loop takes place in
accordance with the encoder configuration in place at that moment.
<PLL>: This is a special option that allows you to select the PLL reference
clock when NET = IP.
<Redial>: It is possible to configure a number of redials for attempting the
first call of this communication. The Prodys IP Family codec will try the
connection in the following cases:
1.- The unit is trying the connection for the first time.
2.- The unit was connected and lost the connection because the line
dropped or the line was disconnected from the other end.
<Keypad>: This option allows the user to lock automatically the frontal panel
keypad.
<Monitor>: This option allows the user to hide or display additional
information on the main window:
VU meters: Indicates audio levels.
-
System: Monitor voltages, temperatures, and fan operation.
-
Streaming: Shows clock-sync algorithm operation and Buffer
-
Occupation Graph (Real Time Network Analyzer). This algorithm
comes into scene when receiving audio over IP. This display is
active when the audio data is "framed" - Under normal
circumstances the indicator should be in the middle Green area.
Prodys S.L. Tel: +34 91 6896880 Θ Fax: +34 91 6943777 Θ Email:
sales@prodys.net
Page 41
Θ Web:
www.prodys.com