III.4 Dialling the destination codec
The last step is to dial the destination codec according to the figure. Parameters
7
to match are the IP Address of the remote codec and the codec number
(by
default codec 1).
Please refer also to section ¡Error! No se encuentra el origen de la
referencia. for related information.
Immediately the audio streaming over IP takes place between both codecs. The
user gets feedback of the dialling success with a green connection indication.
7
Please refer to section V.4 for details on Target Codec.
Prodys S.L. Tel: +34 91 6896880 Θ Fax: +34 91 6943777 Θ Email:
Θ Web:
sales@prodys.net
www.prodys.com
Page 22