Toshiba e-STUDIO163 Service Handbook page 41

Classi-
Code
fication
305 Scanner Image location adjustment
of secondary scanning
direction
(scanner section)
306 Scanner Image location adjustment
of primary scanning direc-
tion
(scanner section)
310 Scanner Forced performing of peak
detection
311 Scanner LED (R) current effective
value setting
312 Scanner LED (B) current effective
value setting
313 Scanner LED (YG) current effective
value setting
340 Scanner Reproduction ratio adjust-
ment of secondary scan-
ning direction
(scanner section)
350 Scanner Shading posi-
tion adjust-
ment
351
354 ADF Adjustment of ADF paper
alignment
357 ADF Fine adjustment of ADF
transport speed
© December 2005 TOSHIBA TEC
Adjustment mode (05)
Default
Func- <Accept-
Items
tion
ALL
<51-206>
ALL
ALL
ALL
<0-255>
ALL
<0-255>
ALL
<0-255>
ALL
<76-181>
Original ALL
glass
ADF ALL
ALL
<0-20>
ALL
<0-100>
e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 21
06/04
RAM Contents
able
value>
105 SYS When the value
increases by "1", the
image shifts by approx.
0.0640 mm toward the
trailing edge of the
paper.
During this adjustment,
the density LED blinks.
127 SYS When the value
<121- increases by "1", the
136> image shifts by approx.
0.169 mm toward the
front side of the paper.
During this adjustment,
the density LED blinks.
- - Activates the light inten-
sity adjustment control
During this adjustment,
the density LED blinks.
76 SYS Displays total of the ini-
tial value and light inten-
sity correction value.
62 SYS Displays total of the ini-
tial value and light inten-
sity correction value.
160 SYS Displays total of the ini-
tial value and light inten-
sity correction value.
134 SYS When the value
increases by "1", the
reproduction ratio in the
secondary scanning
direction (vertical to
paper feeding direction)
increases by approx.
0.0947%.
During this adjustment,
the density LED blinks.
128 SYS 0.064 mm/step
<118-
138>
128 SYS
During this adjustment,
<118-
the density LED blinks.
138>
10 SYS When the value
increases by "1", the
aligning amount
increases by approx.
0.4 mm.
50 SYS When the value
increases by "1", the
reproduction ratio of the
secondary scanning
direction when using the
ADF increases by
approx. 0.1%.
During this adjustment,
the density LED blinks.
Proce-
dure
1
2
1
7
1
1
1
1
1
1
1
1