Set Timer - Sunbeam SCH8305 Series Instruction Leaflet

F E AT U R E S - O P E R AT I O N S
Thermostat Control
The next press of the Mode Button ( /Mode) will activate
the thermostat setting, and the LCD will display "27°" as the
default temperature setting.
Your heater is equipped with a digital thermostat that allows
you to set your heater to a precise comfort level (18°C-30°C)
by pressing the Up ( ) and Down ( ) Button on the
control panel or remote control. The LCD Display will show
the selected temperature reading. When the preset
temperature is reached, the heater will shut off and cool
down for 10 seconds. When the room temperature drops
below the preset temperature, the heater will automatically
turn on again to maintain the preset temperature level.
FrostProtect Setting
®
Your heater is equipped with FrostProtect
heater will turn on automatically when the room temperature
drops below 5°C. To activate FrostProtect
) Button until the LCD Display show "5" and the
Down (
FrostProtect icon ( ) will appear on the LCD Display.
®
FA - Fan Only
Press the Mode Button ( /Mode) again to activate Fan
Only setting. The heater will run at fan-only operation
without heat output.
NOTE: To shut unit off at any time, press and hold the Mode
Button ( /Mode) on the control panel for 2 seconds or
press the Power Button ( ) on the remote control to shut
off the heater.
NOTE: It is normal for the heater to cycle ON and OFF as it
maintains the preset temperature. To prevent the unit from
cycling, you need to change the thermostat setting. The
digital thermostat has memory; it will remember the last
temperature setting before the heater is turned off. However,
if the heater is unplugged, the digital thermostat will no
longer remember the previous temperature setting. You will
need to reset the digital thermostat if the heater is
unplugged.
CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN
OPERATION.
This heater is equipped with 24-Hour Auto Shut-off Timer
feature. This allows you to program your heater to shut off
automatically after running a defined time interval (from 0
to 24 hours).
1. Press the Timer Button ( ) on the control panel once to
2. Press the Up ( ) and Down ( ) button to adjust from
3. To cancel the Timer feature, press the Timer Button
setting. The
®
NOTE: The timer does not work with the FrostProtect
setting, press the
®
Press the Oscillation Button (
panel or remote control to activate or stop the oscillation
feature.
NOTE: Please do not manually turn the heater on the base.
It is designed to turn only by motorized oscillation.

Set Timer

activate the Timer.
0 to 24 to select your desired time interval for the
heater to shut-off automatically. The selected hour will
appear on the LCD Display and the "Hr" icon will blink in
3 seconds to indicate that the selected timer is activated.
The LCD Display will return to show the preset
temperature and mode setting.
( ) twice within 5 seconds.
Oscillation
Setting.
®
) either on the control