Com p a c t B o a r d
2.38 USB Connector (USB1/USB2)
The PCM-6893 board provides four USB (Universal Serial Bus)
interfaces supporting up to 4 USB ports. The USB interfaces comply
with USB specification rev. 1.1 and are fuse protected.
The USB interfaces are accessed through two 10-pin flat-cable
connectors, USB1 & USB2. The adapter cable has a 10-pin
connector on one end and two USB connectors on the bracket on
the other end.
USB1 Connector (USB1)
Pin
Signal
1
5VSB
3
USB DT0-
5
USB DT0+
7
GND
USB2 Connector (USB2)
Pin
Signal
1
5VSB
3
USB DT2-
5
USB DT2+
7
GND
Chapter 2 Quick Installation Guide
P C M - 6 8 9 3
Pin
Signal
2
GND
4
USB DT1+
6
USB DT1-
8
5VSB
Pin
Signal
2
GND
4
USB DT3+
6
USB DT3-
8
5VSB
2 - 29