Advertisement
WARNING: Failure to observe safety instructions and reasonable safety practices can
cause Property Damage, Serious Bodily Injury and/or Death. BE CAREFUL!! WATCH OUT FOR
BYSTANDERS!!
DANGER: NEVER run engine inside building or enclosed area. Exhaust gases contain carbon
monoxide, an odorless and deadly poison.
DANGER: NEVER drill holes where there is a possibility of underground power cables
or other hazards. The exact location of underground services must be determined prior to drilling.
Inadvertent severing of telephone, fiber optic or CATV transmission cable, or damage to sewer pipe is
costly; RUPTURING OF GAS OR WATER LINES CAN CAUSE SERIOUS BODILY INJURY AND/
OR DEATH. COMING INTO CONTACT WITH BURIED POWER LINES CAN CAUSE SERIOUS
BODILY INJURY, SEVERE BURNS, AND/OR ELECTROCUTION. Call local utility companies or your
local "One-Call" number at least 48 hours before digging and have underground utilities marked.
WARNING: Never use hands to search for leaks. Instead, use a piece of cardboard or wood. Escaping
hydraulic fluid under pressure can have sufficient force to penetrate the skin, causing serious injury.
Before disconnecting lines, be sure to relieve pressure. Before applying pressure, be sure connections
are tight and fittings and hoses are not damaged.
If injured by escaping fluid, see a doctor at once. Serious infection and/or reaction can develop if proper
medical treatment is not administered immediately.
CAUTION:
1. Read and understand this operator's manual and the operator's manual for the engine before
operating.
2. Read and understand the operator's manual for the equipment to be operated with the Hydraulic
Power Source.
3. Always correctly install the torque tube before operating the earth drill.
4. Make sure everyone is clear before operating.
5. Keep bystanders at least 10 feet away from work area.
6. Before starting, be sure hydraulic pressure is off.
7. Relieve hydraulic pressure before disconnecting lines.
8. Shut off engine to adjust, service, clean or re-fuel.
9. Keep all safety shields and devices in place.
10. Keep hands, feet and clothing away from moving parts.
11. Do not leave machine unattended with engine running.
12. Wear safety glasses.
It is the responsibility of the contractor, owner and user to maintain and operate the Hydraulic Power Source in
compliance with operating instructions provided. Observe all listed safety instructions and other reasonable safety
practices. LITTLE BEAVER, INC. accepts no responsibility for damages to this machine, and other property damage
and/or bodily injury due to careless or improper operations.
LITTLE BEAVER, INC. does not recommend or condone any unauthorized modifications to the Hydraulic Power
Source.
LITTLE BEAVER, INC. reserves the right to make changes in design and changes for improvements upon its product
without imposing any obligation upon itself to install the same upon its products theretofore manufactured.
Your operators manual offers recommendations for prolonged and satisfactory service.
0196
SAFETY INSTRUCTIONS
NOTICE
Page O-5
Advertisement
