Installing A Cf Card - Canon PowerShot S230 DIGITAL ELPH Connection Manual

22
Preparing the Camera

Installing a CF Card

Turn the camera power off and insert the CF card with the following
procedures.
1
1
Label
CF Card Eject Button
• Since the camera is writing, reading, erasing or transmitting
data to or from the CF card when the indicator blinks green,
never perform the following actions during this time. It
could corrupt the image data.
- Subject the camera body to vibration or shocks.
- Turn the camera's power off, or open the battery cover
• Please note that CF cards formatted with other manufacturers'
cameras or a computer, or formatted or edited with application
programs, may not operate correctly in the camera.
• You are recommended to use CF cards that have been
formatted in your camera (p. 89). The card supplied with the
camera may be used without further formatting.
2
2
or CF card slot cover.
• Slide the lock up and open the CF card
slot cover.
• Insert the CF card with its label facing
upward until the slot's eject button fully
extends. Close the CF card slot cover.
• To remove the CF card, push the eject
button and pull the CF card out.