Canon PowerShot S230 DIGITAL ELPH Connection Manual page 299

List of Messages Displayed while a Direct Print Function
Compatible Bubble Jet Printer is Connected
The following messages may appear on the camera's LCD monitor while
a direct print function compatible Bubble Jet printer (sold separately) is
connected.
Check the error number displayed on the control panel of Bubble
Jet printer and refer to the Bubble Jet Printer Quick Start Guide.
Printer in use
Printer warming up
No printhead
Printer cover open
Media type error
Paper lever error
Low ink level
Waste tank full
Printer error
List of Menu Options and Messages
Printer is busy printing from a memory
card in computer or printer. Printer will
automatically start printing from camera
when the current print queue empties.
Printer is warming up. When it is ready,
the printer will start printing automati-
cally.
No printhead installed in printer.
Secure the printer front cover.
You selected a paper type incompatible
with the printer. Select a compatible
paper type in the Print Style menu.
Adjust the paper thickness lever to the
proper position.
Ink tank needs replacement soon.
Prepare a new ink tank. Select [Continue]
in the error message to resume printing.
Restart printing by pressing RESUME/
CANCEL button on printer, but request
a replacement waste ink tank from your
retailer or service center (see printer
Quick Start Guide or the Contact List
provided with the printer) soon.
Turn printer off and on again. If error
persists, consult service center listed in
printer Quick Start Guide or in the
Contact List provided with the printer.
129