Wildlife Materials TRX-2000S Operating Instructions Manual page 9

--- Turn the receiver so the back faces you. Peel the plastic backing off the other loose
Velcro strip. Place the strip at the back center of the receiver. Rub to seal.
• Fit the receiver in the case. The Velcro on the receiver and on the case will bond
together. This will insure that your receiver does not fall out during use.
Wildlife Materials, Inc. shall not be liable for any loss or damage resulting directly
or indirectly, or as a consequence of or incidental to, the use or loss of any
Wildlife Materials product including, without limitation, the original purchaser's
expenses associated with downtime, interrupted or lost data, or damages to
persons, animals or property.
Wildlife Materials International, Inc.
1202 Walnut Street Murphysboro, IL 62966 USA
Phone: 1-800-842-4537
FAX: 618-687-3539
34 YEARS MANUFACTURING EXPERIENCE