How To Use The Mixer; To Attach Turbo Beater™ Accessories; To Remove Turbo Beater™ Accessories - KitchenAid 7 & 9 SPEED Instructions And Recipes Manual

Be sure to read and follow the specific
instructions in this manual for proper
use of this mixer.
WARNING
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in
broken bones, cuts or bruises.
NOTE: Flashing light indicates ready
to operate. Do not touch beaters.
If the mixer runs when "0" is flashing,
or there is nothing displayed on the
speed indicator, do not use it: call
1-800-541-6390 to arrange
for service.
To Attach Accessories
1. Unplug the mixer from the
electrical outlet.
2. Each pair of accessories (Turbo
Beaters, optional Dough Hooks)
will have one accessory with a
collar (D), and one without (C). The
hand mixer has a specific opening
for each. Single accessories, like the
optional Pro Whisk (included with
Model KHM9P) or Liquid Blender
Rod, will always have a collar (D).
C
3. Insert the accessory with a collar
(D) into the larger opening (B) of
the hand mixer. Line up the flanges

How to Use the Mixer

D
A
on the accessory with the slots in
the opening and push in until it
locks into place.
4. Insert the accessory without a
collar (C) into the smaller opening
(A) of the hand mixer. Line up the
flanges on the accessory with the
slots in the opening and push in
until it locks into place.
To Remove Accessories
1. If the mixer is running, stop mixer
by touching the "Off" button.
2. Unplug the mixer from the
electrical outlet.
3. Press the Ejector Button (E) to
release the accessories from the
mixer, then remove them.
8
B
E