How To Use The Remote Control - Wadia m330 media server Owner's Manual

How to use the Remote Control

The Remote Control is capable of performing most
Operating Functions for the m330 Media Server.
Note: Refer to the "How to Operate" Section of this
manual for additional information using this
Remote Control.
Dual Function Push-buttons
The four push-buttons in the ellipse dashed area of
the Remote Control, are dual function. When music
is playing, the (+) Push-button increases the volume
level and the (-) Push-button decreases the volume
1
level . Push the : Push-button for the next selection
1
or push the 9 Push-button for the previous selection.
During the time a m330 Menu is being accessed,
the push-buttons at the front/top of the Remote
Control provide the ability to navigate the menus and
select the desired choice or function. The (+) Push-but-
ton is used to move the cursor Up through the menu.
Likewise, the (-) Push-button is used to move Down.
The 9 Push-button is used to move to the left, the :
Push-button is used to move to the right and the
used to select the highlighted choice.
1 Adjusting the volume level using the Remote
Control first requires a change to the default setting
located in the Setup Mode, refer to pages 16 and 17
for additional information.
Starts playback, pauses
playback and used to
select a menu choice or
menu item
Directional Down
Push-button and
used to decrease the
volume level
Directional Left
Push-button and
used to select the
previous selection
Reserved for
future use
is
►
Selects a Menu
Current selection
is liked
How to use the Remote Control
Directional Push-buttons
Momentarily press
to Power the m330
ON or OFF
Directional Up
Push-button and
used to increase
the volume level
Directional Right
Push-button and
used to select the
next selection
Moves forward in time
through a selection
Selects available
information
Current selection
is disliked
13