Table of Contents
Advertisement
PREPARATION OF
CARTON
Utilization
of the canon may make installation
easier.
CHECK THE PRODUCT FOR DAMAGE
1. Remove product and shipping
pads.
Visually
check the product after removing
from carton.
Remove all packing material from inside the oven cavity.
Check the oven for any damage, such as misaligned
door,
damaged
gaskets around door or dents inside the oven
cavity or on the door. If there is any damage, please do not
operate the oven until it has been checked by your Kitch-
enAid Dealer and any necessary repairs made.
PREPARATION OF PRODUCT
1. Rest the product on its side as shown in Figure 1. Use a portion of the carton or some other material
to protect the outercase. Failure to do so could result in damage to the outercase of the unit.
2. pull the two slider levers to release the mounting plate hooks. R emove the mounting plates from the
back of the product by gently pulling each plate toward you and sliding it to the right. Familiarize
yourself with the operation of the upper hooks and the slider fevers so you will be aware of the proper
procedure for mounting the unit to the wall.
/
Upper Hooks
Mounting Plates
\
I
IQ:
$7
m
. .
.
. .
. .
cs= e
0
irs
>
Slider levers
Figure 1.
Advertisement
Table of Contents
