Pace VPN-Lite User Manual page 10

Comment: Remove current connection:
ip delete interface ipwan
Comment: The above command will generate some warnings/errors – this is normal.
transports delete wanlink
Comment: Setup bridge transport and interface:
rfc1483 add transport @wanlink a1 8 35 llc bridged
bridge add interface ipwan
bridge attach ipwan @wanlink
Comment: Setup Internet Connection:
cd WANConnectionDevice_1_WANIPConnection
set Enable 0
cd ..
set Description 'Internet Service'
cd WANPPPConnection
set Username <ISP account username>
set Password <ISP account password>
fcommit
cd ..
Comment: Add NATting for Internet Connection
set NATEnable 1
cd PhysicalInterface_1
set Enable 1
set Type ATMEthernetInterface
set Index 1
cd _
cd WANConnectionDevice_1_WANIPConnection
set Enable 1
cd _
fcommit
TELKOM VPN-Lite 2.5 ver.100712
o
Actual commands that need to be run on the telnet
session are indicated in blue.
o
Please note that non-bold words enclosed with <angle
brackets> are user parameters and have to be provided
by yourself. Make sure that you substitute all <angle
brackets> with your own user specific parameters,
before you start executing the script below.
o
Please make sure that all commands are run
successfully. It is not recommended to copy and paste
the whole script at once as possible telnet buffer
limitations might cause certain commands not to be
pasted correctly.
Words following "Comment:" are comments to the user,
o
and not valid commands.
Page 10