Advertisement
I
M
P
O
R
T
A
N
T
I
N
I
M
P
O
R
T
A
N
T
I
N
P
L
E
A
S
E
N
O
T
E
:
P
L
E
A
S
E
N
O
T
E
:
o Prior to lighting the heater, ensure that the protective plastic coating from
the stainless steel parts has been removed.
o Do not place articles on or against this appliance.
o Do not spray aerosols in the vicinity of this appliance.
o Do not use or store flammable materials near this appliance.
o Do not operate with covers or panels removed.
o Children and adults should be alerted to the hazards of high surface
temperatures, burns and clothing ignition.
o Young children should be carefully supervised when they are in the area of
the appliance.
o Clothing or other flammable materials should not be hung from the
appliance, or placed on or near the appliance.
o Any guard or other protective device removed for servicing the appliance
must be replaced prior to operating the appliance.
o Installation of appliances fitted to fixed gas supply systems and repair of all
appliances must be carried out by a qualified service person.
o It is imperative that control compartment, burners and circulating air
passageways of the appliance be kept clean.
o Not recommended for installation in areas with a salt-laden atmosphere.
Parasol Heaters Australia ‐ 61 3 9549 4466
Created on 12/08/2009 11:58:24 PM
F
O
R
M
A
T
I
O
N
R
F
O
R
M
A
T
I
O
N
R
This heater must be installed to the requirements of gas
code AS 5601 and to the requirements of the local
authorities both gas and electrical.
This heater needs 240 VAC power.
This appliance must be installed with the correct pipe size
and gas pressure to operate correctly.
The gas installer must ensure that the gas piping is of
adequate size to ensure correct pressure and volume suited
The burner pressure should be checked when all the gas
equipment on the site is operating.
E
G
A
R
D
I
N
G
U
N
E
G
A
R
D
I
N
G
U
N
WARNING!
WARNING!
WARNING!
for the burners.
Installation/Operating Instructions
I
T
I
T
Page 4 of 11
Advertisement
