440BX/ZX AT
Power Management : (Default setting: "User Define")
This category allows you to select the type (or degree) of power saving and is directly
related to the following modes:
There are four selections for Power Management, three of which have fixed mode
settings.
Disable (default)
Min. Power Saving
Max. Power Saving Maximum
User Defined
PM Control APM: (Default setting: "Yes" )
When enabled, an Advanced Power Management device will be activated to enhance
the Max. Power Saving mode and stop the CPU internal clock.
If the Max. Power Saving is not enabled, this will be preset to No.
MAINBOARD
1. Doze Mode
2. Standby Mode
3. Suspend Mode
4. HDD Power Down
No power management. Disables all four modes
Minimum power management. Doze Mode = 1 hr.
Standby Mode = 1 hr., Suspend Mode = 1 hr., and
HDD Power Down = 15 min.
AVAILABLE FOR SL CPU'S. Doze Mode = 1
min., Standby Mode = 1 min., Suspend Mode = 1
min., and HDD Power Down = 1 min.
Allows you to set each mode individually. When
not disabled, each of the ranges are from 1 min. to
1 hr. except for HDD Power Down which ranges
from 1 min. to 15 min. and disable.
AWARD BIOS SETUP
power
management
4-34
--
ONLY