Standard Cmos Setup - Intel PT-6IBT User Manual

440BX/ZX AT
The following pages show all the screens which you will find in the CMOS SETUP
program, each picture will contain the selection items and its default settings. At
the bottom of some screen, you will find the description of all function key which
can be used to change the settings. If you are not quite sure of the definition for
some specific items, please consult with other technician for details.

4.4 STANDARD CMOS SETUP

Date (mm : dd : yy) : Thr,
Time (hh : mm : ss : 14 : 59 : 21
HARD DISKS
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Drive A : 1.44M, 3.5 in.
Drive B : None
Floppy 3 mode support : Disabled
Video : EGA/VGA
Halt On : All Errors
ESC : Quit
F1 : Help
Fig. 4-3 STANDARD CMOS SETUP screen.
MODE :
The BIOS on the mainboard is the updated one and which provides three different
modes to support both normal IDE HDD and the one which is above 528MB:
NORMAL : For IDE hard disk drives which is smaller than 528MB.
LBA : For IDE hard disk drive which is above 528MB (ideally, it can be as big
as 8.4GB ) that use Logic Block Addressing (LBA) mode.
Large : For IDE HDD which is above 528MB and does not support LBA mode.
Note : "large mode" may not be fully supported by all operation systems. It is suggested
to be used with the MS-DOS, such HDD is not very popular nowadays.
Auto : This mode will auto-detect your IDE driver during boot-up.
(Note: Some certain operation systems (such as SCO®-UNIX™ ), only "NORMAL
mode" is allowed when installation.)
MAINBOARD
ROM PCI / ISA BIOS (2A69JXXX)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
May 7 1998
TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Auto 0 0
None 0 0
Auto 0 0
None 0 0
: Select Item
(Shift)F2 : Change Color
AWARD BIOS SETUP
0 0
0 0
0 0
0 0
Base Memory :
Extended Memory : xxxxxx K
Other Memory : xxxxxx K
Total Memory : xxxxxx K
PU/PD/+/- : Modify
4-26
0 0 Auto
0 0 ------
0 0 Auto
0 0 ------
640 K