Using The Control Panel; Standby Mode - Samsung TC570 5 Series User Manual

Getting Started
✎
The product colour and shape may vary depending on the model.
Down (Front)
Left
Up (Rear)
TV Controller
Power on
Adjusting the volume
Selecting a channel
Using the function menu
Selecting the MENUm
Selecting the MEDIA.P
SOURCEs
Selecting the
Power off (P)
✎
To close the Menu, MEDIA.P or Source, press the Controller for more than 1 second.
✎
When selecting the function by moving the controller to the forwards/backwards/left/right directions, be sure
not to press the controller. If you press it first, you cannot operate it to move the forwards/backwards/left/right
directions.

Standby mode

Your product enters Standby mode when you turn it off and continues to consume a small amount of electric power. To
be safe and to decrease power consumption, do not leave your product in standby mode for long periods of time (when
you are away on vacation, for example). It is best to unplug the power cord.

Using the Control Panel

Right
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusts the volume by moving the controller from side to side when the power is on.
Select a channel by moving the Controller backwards and forwards when the power is
on.
To view and use the Function menu, press and release the Controller when the power is
on. To close the Function menu, press and release the Controller again.
With the Function menu visible, select the
(On Screen Display) Menu appears. Select an option by moving the Controller to the right. Move the
Controller to the right or left, or backwards and forwards to make additional selections. To change a
parameter, select it, and then press the Controller.
With the Function menu visible, select
main screen appears. Select an application by moving the Controller, and then pressing the
Controller.
With the Function menu visible, open the
Source screen appears. To select a source, move the Controller back and forth. When the source
you want is highlighted, press the Controller.
With the Function menu visible, select Power off (P) by pulling the Controller forwards, and then
press the Controller.
English - 13
m
Remote control sensor
MENUm by moving the Controller to the left. The OSD
MEDIA.P by moving the Controller backwards. The
SOURCEs by pushing the Controller to the right. The
Function menu
R
P
MEDIA.P