Getting Started; Package Contents; Installing/Replacing The Batteries - SoundFreaq Sound Stack SFQ-03 Use Manual

Getting Started

Package Contents

Examine whether the following package contents are all included:
Main Unit
Adapter Cable

Installing/Replacing the Batteries

CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type.
1. Squeeze and pull to release the battery cover
latch. You can remove the battery door with
your fingernails by using the spaces set back
in wall.
Squeeze
2. Match the polarity on the Lithium Cell with a
plus sign (+) on the battery tray.
3. Slide the tray with new battery into the
battery compartment until you hear a click
sound.
+
C 2025 R
3V
DOCK
PAIR OPTICAL AUX
VOLUME
Remote Control
+
C 2025 R
3V
Lithium Coin Battery
CR2025
It is loaded on the remote

control at the factory.
Pull
Switch Mode
Power Supply
Warning - When Using the Battery
Store the battery in a place where children

cannot reach. If a child accidentally swallows
the battery, consult a doctor immediately.
Do not recharge, short circuit, disassemble,

heat the battery, or dispose the battery in
fire.
Do not leave the battery with other metallic

materials.
When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the
battery may start to give off heat, crack, or
start a fire.
Do not poke the battery with tweezers or

similar tools.
Dispose of battery in the proper manner,

according to federal, state, and local
regulations.
This product contains a CR Coin Cell Lithium

Battery that contains Perchlorate Material, so
that special handling may apply.
.5.
FM Antenna