Playing Back Via Bluetooth; Downloading The Soundfreaq App - SoundFreaq Sound Stack SFQ-03 Use Manual

Playing back via Bluetooth

Downloading the SoundFreaq App

We have developed an App to give you
full control from your iPhone/iPad/iPod
touch while playing audio over the
Bluetooth wireless connection, please
download the "SoundFreaq Remote" App
for FREE.
You will need the App to operate the
FM radio function.
After you establish a connection between
your iPhone/iPad/iPod touch and Sound
Stack, a prompt will be displayed on your
iPhone/iPad/iPod touch asking you if you
would like to install our App, click "Yes" to
install the APP. After a while, "For his
Accessory" page will appear on your
iPhone/iPad/iPod touch. Enter the "User
Name" and "Password" in the iTune. After
pressing the "FREE" button, press the
"INSTALL APP" button that will appear to
install the APP for your unit. When the
installation is finished, you can control the
playback from your iPhone/iPad/iPod
touch.
Warning: Do not unplug the AC adapter from
the unit when playing back a track via the
Bluetooth connection.
Notes:
If your mobile phone supports A2DP protocol,

its music will play through the unit.
You can make a Bluetooth connection with a

mobile phone, an iPhone/iPad/iPod touch or
any other Bluetooth-enabled devices.
1. Press the "
The pair indicator is solid on when the unit is

powered on.
2. Press the PAIR button on the unit to put the
unit into the pair mode.
The Pair indicator starts blinking at a fast rate.

If you hold the PAIR button for more than 2

seconds during the process of pairing, the
operation will be cancelled.
Source Button
PAIR Button Pair Indicator
3. During this period, you can operate the mobile
phone, iPad or Bluetooth-enabled device to
pair with the unit within a 33 feet (10m) range.
Please check the user manual of the iPad or

Bluetooth-enabled device with which you
are initiating pair to learn about Bluetooth
connection with any other devices.
4. Once the unit is detected and its name
"Sound Stack" appears on the display of your
Bluetooth-enabled device, key in the default
password "1234" if a prompt requests it.
.12.
" button to power on the unit.
Main Unit