Jenn-Air JDB-5 Use & Care Manual page 11

C , O
YCLES
Cycles
Choose the cycle that best describes your dishload by pressing the corresponding touchpad. (See page 2,
Operating Tips, for how to begin the cycle).
CYCLE
Heavy Wash
Normal Wash
China/Crystal
Sensor Clean
(select models)
Rinse Only
Quick Wash or
Insta Wash
(select models)
* Number of fills will vary depending on the soil level of each load.
Notes
• Depending on water temperature, there may be time added to the cycle to bring water up to temperature.
• Cycle times shown in the numerical display (select models) will increase or decrease, based on each load's soil
level, water temperature and selected options.
• Only the following certified cycles have been designed to meet NSF requirements (NSF/ANSI 184 Residential
Dishwasher) for sanitization: Sensor Clean (select models), Heavy Wash, Normal Wash and China/Crystal.
PTIONS AND
DESCRIPTION
Long cycle for heavy food soils.
Medium cycle for average food
soils. ClearScan ™ Turbidity
sensor is active with this cycle.
Short cycle for light food soils.
Designed to select the number
of water fills best suited for the
soil level of each load. ClearScan
Turbidity sensor is active with
this cycle.
Rinses dishes being held until
there is a full load.
Quick cycle for light food soils.
Does not include drying time.
L
IGHTS
TIME
(APPROX.
MINUTES)
132
97-117
82
™ 94-128
9
38
10
NUMBER OF
WASHES/RINSES
2 washes/3 rinses
1-2 washes*/1-2 rinses*
1 wash/2 rinses
1-2 washes*/2-3 rinses*
1 rinse
1 wash/2 rinses
Cont.