Mounting The D Class To The E Series Monitor - Dell E Series Installation Instructions

Vesa mounting bracket

Hide thumbs Also See for E Series:

Mounting the Base Extension to the 22- and 23-inch

E Series Monitor

You can skip this step if you are using an E Series Monitor of a different size.

1. Place the E Series Monitor face down on a padded table, with the foot of the stand

2. Slide the Base Extension onto the monitor stand as shown and firmly attach the

Mounting the D Class to the E Series Monitor

Use the following instructions to mount the D class cloud client to the Dell E Series

Monitor VESA Mounting Bracket.

1. Remove the cloud client from its horizontal or vertical stand. Using a Phillips-head

hanging over the table's edge.

provided screws.

Important: The bottom of the stand has either a plastic base (as shown) or a metal

base. If your stand has the metal base, use the longer screws from the Base

Extension kit. If your stand has the plastic base, use the shorter screws.

screwdriver, remove the four (4) filler screws from the side of the cloud client and

replace them with the provided four (4) shoulder screws. Discard the filler screws.