Shm10 Pairing With Smartphone; Mobilr Phone Call Making And Answering - Bell MAG-9 SENA Installation Manual

MAG-9 SENA BLUETOOTH

SHM10 Pairing with Smartphone

Pairing your Smartphone with the SMH10 allows you to take mobile calls from your phone or listen to music.
1. Turn on the SMH10 headset.
2. Press and hold the Phone button on the SMH10 for 5 seconds until the LED flashes red and blue alternately.
3. On your Smartphone turn Bluetooth on (Settings > General > Bluetooth). The smartphone will begin to search for
devices. Wait for the smartphone to detect the SMH10.
4. When Sena SMH10 appears on the list, tap on it to start the pairing process.
5. Your SMH10 is now paired with the Smartphone.
Note: If prompted for a pass key, enter 0000.
MOBILE PHONE CALL MAKING AND ANSWERING
1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call.
2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone
Answering is enabled.
3. To end a call, tap the Phone Button or press the Jog Dial for 2 seconds until you hear a beep, or wait for the
called person to end the call.
4. To reject a call, press the Jog Dial for 2 seconds until you hear a beep while the phone is ringing.
5. To transfer a call between the mobile phone and the headset during the phone conversation, press the Phone
Button for 2 seconds until you hear a beep.
6. There are several ways to make a phone call:
• Enter numbers on your mobile phone keypad and make a call. Then the call is automatically transferred to the headset.
• For some older mobile phones which do not automatically transfer calls to the headset, press the Phone Button after
entering phone numbers on the mobile phone keypad.
• Tap the Phone Button in stand-by mode to activate the voice dialing of your mobile phone. For this, the voice
dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction.
• To redial the last number, double tap the Phone Button in stand-by mode. You will hear a voice prompt
saying "Last number redial".
SMH10 HEADSET INSTALLATION
™