Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Bell MAG-9 SENA
- Page 2 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™...
- Page 3 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™...
- Page 4 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™...
- Page 5 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™ Microphone Noise Reduction Cap The microphone cap may be useful to reduce incoming wind noise by moving the wind away from the microphone, providing clearer voice audio sound.
- Page 6 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™ SMH10 Powering ON/OFF Powering On: Press and hold the Jog Dial and the Phone Button at the same time for about two second to power on. The blue LED turns on and you will hear ascending beeps.
- Page 7 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™ SMH10 Intercom Pairing The SMH10 can be paired with another SMH10 headset for Bluetooth intercom conversation. Pairing A & B 1. Turn on both SMH10 headsets. 2. Press and hold the Jog Dial on both the SHM10 headsets until the red LED starts to flash rapidly on both headsets.
- Page 8 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™ SHM10 Pairing with Smartphone Pairing your Smartphone with the SMH10 allows you to take mobile calls from your phone or listen to music. 1. Turn on the SMH10 headset. 2. Press and hold the Phone button on the SMH10 for 5 seconds until the LED flashes red and blue alternately.
- Page 9 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™ SMH10 Pairing with GPS In this example a zumo 660 is used to pair with the SMH10. 1. Turn on the SMH10 by holding the Phone button and Jog Dial. 2. Press and hold the Phone button on the SMH10 for 5 seconds until the LED starts to flash red and blue rapidly.
- Page 10 MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION ™ Pairing the SM10 to two SMH10 headsets Pairing the First SMH10 headset 1. Turn on the SMH10 (First). 2. Hold down the SMH10’s Phone Button for 5 seconds until the Red and Blue LED flashes alternately.