Pairing The Sm10 To Two Smh10 Headsets - Bell MAG-9 SENA Installation Manual

MAG-9 SENA BLUETOOTH SMH10 HEADSET INSTALLATION
™

Pairing the SM10 to two SMH10 headsets

Pairing the First SMH10 headset
1. Turn on the SMH10 (First).
2. Hold down the SMH10's Phone Button for 5 seconds until the Red and Blue LED flashes alternately.
3. Turn on the SM10.
4. Hold down the SM10's Pairing Button for 5 seconds until the Blue LED starts to flash rapidly.
5. Wait a few seconds for the pairing process.
6. When pairing is completed, the Blue LED on the SM10 will flash every 2 seconds.
Pairing the Second SMH10 headset
1. Turn on the SMH10 (Second)
2. Hold the down the SMH10's Phone Button for 5 seconds until the Red and Blue LED flashes alternately.
3. Turn on the SM10
4. Hold down the SM10's Pairing Button for 9 seconds until the Red LED starts to flash rapidly.
5. Wait for a few seconds for the pairing process.
6. When pairing is completed, the SM10's Red and Blue LED will flash every 2 seconds.