Tarantula RS.1 Installation Manual page 9

PAGE 9
PROGRAMMING
SYSTEM PROGRAMMING - Menu 1
ENTERING PROGRAM MODE
1 - Cycle the Ignition Key On/Off On/Off On (Leaving the key ON)
2 - Press and release the Program Switch 1 time. The park lights will turn on and the horn
will honk to confirm entering program mode.
3 - Select the Program Menu by pressing...
Press Antenna
MENU 1
The system will confirm the program menu by flashing the park lights and with horn honks.
4 - Press and Release the Program Switch to advance through the settings.
(Confirmed by Park Lights/ Horn Honks & LED flashes)
5 - Press and Hold the Program Switch to change the setting.
(Confirmed by Park Lights/ Horn Honks & LED flashes)
6 - To exit Program Mode, turn the key off.
(Confirmed by Long Horn Honk)
Example- Programming Menu 1, Setting 3 to Double Lock Pulse.
1 - Cycle the Ignition Key On/Off On/Off On
2 - Press and release the Program Switch 1 time. (1 Honk/ Park Lights ON)
3- Press and release the Antenna button to advance in Menu 1. (1 Honk/ 1 flash)
4- Press and release the program button until the LEDs on the antenna flash 3 times.
**The park lights will flash and the Horn will Honk 3 times to confirm the current setting)
5- Press and hold the program button. The Park Light will flash once (option 1), pause then flash
twice to confirm option 2 has been selected. The Horn will also Honk 1 time (option 1) then 2
times to confirm the option 2.
6- Release the program switch and turn off key to exit.
SYSTEM RESET
1 - Cycle the Ignition Key On/Off On/Off On (Leaving the key ON)
2 - Press and RELEASE the Program Switch 1 time and the park light will turn on.
(Horn will honk to confirm program mode has been entered)
3 - Press and HOLD the Program Switch for 5 seconds or until the Park Lights flash 3 times.
(Confirmed by 3 Park Lights flashes/ Horn Honks)
4 - Turn the ignition key OFF to exit.
Press Unlock
MENU 2
Press Start
MENU 3
RS.1
INSTALL MANUAL
Unlock & Start
MENU 4