Tarantula RS.1 Installation Manual page 4

RS.1
INSTALL MANUAL
OUTPUT TO ACTIVATE DOOR LOCK CIRCUIT (-)
OUTPUT FOR VOLTAGE INVERTER*
OUTPUT TO ACTIVATE DOOR UNLOCK CIRCUIT (-)
GROUND WHEN RUNNING (BYPASS TURN ON)
GROUND FOR BYPASS MODULE
N/A
BYPASS MODULE DATA COMMUNICATION PORT
The default setting is set for FORTIN™ Bypass Modules.
* THE CENTER PIN OF THE KEYLESS CONNECTOR IS LOW CURRENT AND
IS DESIGNED TO SUPPLY POWER TO DOOR LOCK MODULES (DO NOT
CONNECT TO RELAYS) OVERLOADING THIS OUTPUT WILL DAMAGE THE
MODULE!
** FOR USE WITH COMPATIBLE BYPASS MODULES ONLY.
SELECTABLE PARK LIGHT OUTPUT
BY DEFAULT THE SYSTEM COMES WITH THE PARK
LIGHT JUMPER SET FOR POSITIVE PARK LIGHT
OUTPUT. TO CHANGE THE SYSTEM TO A NEGATIVE
PARK LIGHT OUTPUT, PLACE THE JUMPER IN THE
NEGATIVE PARK LIGHT POSITION SHOWN IN THE
DIAGRAM. (Position 2)
*THE PARK LIGHT RELAY WILL NOT "CLICK" WHEN
SET FOR NEGATIVE PARK LIGHTS.
SYSTEM PROGRAMMING - Menu 1
WIRE DIAGRAM
GREEN
N/A*
BLUE
ORANGE
BLACK
N/A
Position 1 or Position 2
PAGE 4
1
2
3
1
2
3
1
2
3
4
POSITIVE NEGATIVE
PARK LIGHT PARK LIGHT