DeWalt DWMT70784 Instruction Manual page 10

FEATURES
WHeel GuarD
The wheel guard (a) allows
for quick, easy guard adjust-
ments and positioning to
protect against when the tool
is in use.
COlleT
The collet (e) is where cut-
ting wheels may be placed,
and is connected to the
spindle (F). The hex head
screw (B) and washer (C)
hold the cutting wheel in place.
TrIGGer
The trigger (I) allows the operator
to control the start and stop of
the air tool.
saFeTY THrOTTle leVer
The safety throttle lever (J)
prevents the tool from accidentally
being actuated.
erGOnOMIC BODY
The body of the air tool is an ergonomically designed cushion grip
body (K) for reduced weight and superior power-to-weight ratio.
The grip is made of molded thermoplastic elastomer (TPE) design
for improved comfort, slippage reduction, and better tool control.
A B
C
E
F
FLAT
FLAT
J
K
aIr InleT
The tool's air inlet (G) located at
the bottom of the handle is used for
connecting an air supply with
a standard 1/4" NPT
American thread.
eXHausT
The exhaust (H) is located at the base
of the handle and allows the exhaust to
be directed away from the operator and
working area.
I
10
G
H