Calibration Of The Touch Screen; Control Panel - Revo IT9000 User Manual

Caution ：
Never use an actual pen, pencil, or sharp/ abrasive object to write on the
touch screen.
Do not apply unnecessary high pressures on the screen.

3.5. Calibration of the touch Screen

On the initial boot-up of the Handy
Terminal, the stylus calibration screen
(Labeled Align Screen) opens. Use the
stylus to press and hold briefly on the
center of each target as it moves around
the screen.
If necessary, adjust the backlight on
the Handy Terminal to make the screen
readable.
When you feel the touch screen
function is poor or the operation does not
match the exact location it should be,
please recalibrate the screen by using the
stylus to tap the Start ‡ Settings ‡ Control Panel ‡ Stylus, to open the
"Calibration" to recalibrate again

3.6. Control Panel

From the Desktop, double click the "My Device" icon then double click the
"Control Panel" icon to open the Windows CE 5.0 control panel. The control
panel can be launched from Start ‡ Settings ‡ Control panel also.
All applet programs are displayed as a icon on the screen.
Notes: Please make sure that StorageCard folder have a subfolder name
"systemtool" after firmware version v1.20. And some execute files of control panel
are store to systemtool folder.
Handy Terminal User Guide
Figure 3-2
30