Saving To Flash - Revo IT9000 User Manual

2. To perform Cold Reset, please press <
simultaneously until Cold reset start.
3. Device will initiate boot up after Cold Reset.
Caution ：

2.6. Saving to Flash

The StorageCard folder let the application or a data file can be stored into the
Flash Memory. To save an application or data to the Flash Memory, from your
current application, select File ‡ Save As ‡ select the StorageCard location and
save it.
You can use backup manager form start ‡ program ‡ backup manager to
backup all system and save it to the StorageCard folder after you install your
application program and do the all setting complete.
Note ：
The StorageCard storage memory persists all reset (warm/cold
reboot) conditions and software/firmware updates.
We strongly recommend installing all applications, applets,
programs, and important data files to the StorageCard location.
If an application or a data file is only installed or saved in RAM, a
Caution ：
hard reset will result in the loss of that application or data file.
The size of the Flash Disk folder will vary, depending on the size of system
firmware 。
Inside of My Device please select StorageCard icon, then tap File ‡
ÿ
Properties 。
The StorageCard Properties dialog will display the size of
ÿ
StorageCard folder 。
Handy Terminal User Guide
Please press the <ESC> & <Power> key first. Try warm
reset before you initiate Cold Reset. All applications will be
Closed and working RAM and all files will be cleared if you
initiate the Cold Reset. It's better install your application and
files to StorageCard folder.
& < & <
> >
key
>
23