Charging The Battery Pack With Single Dock - Revo IT9000 User Manual

3.1.3. Charging the battery pack with Single
Dock
a) Do not leave the battery pack inside of the Handy Terminal
1. Connect the Power cord to the Power adapter
2. Connect the power cord to a power source
3. Plug in the connector of the power adapter with Single Dock
4. Insert the Handy Terminal into the Single Dock
b) Place the spare battery pack into the Single Cradle's spare Battery charging
slot
1. Connect the Power cord to the Power adapter
2. Connect the power cord to a power source
3. Plug in the connector of the power adapter with Single Cradle
4. Insert the Battery pack into the Single Cradle's spare Battery slot
When charging the battery pack, the Power LED on the Handy
Caution ：
Terminal turns to Red. After the battery pack is fully charged, the
Power LED turns to
Please don't remove the Battery pack too long from Handy Terminal
Caution ：
after you have already full-charged the Battery pack and backup
battery pack and start to use the Handy Terminal. Otherwise the data
stored inside SDRAM memory will be lost. Please also keep in mind
power the Handy Terminal off if you want to change the main Battery
pack.
Handy Terminal User Guide
Blue.
27