Troubleshooting - Craftsman 919.722010 Owner's Manual

the inflator. Personal injury can occur. Unplug the inflator before
attempting any repairs.
PROBLEM
Motor will not
run.

TROUBLESHOOTING

Risk of Unsafe Operation. Voltage sources, moving parts,
or compressed air sources are exposed when repairing
CAUSE
Fuse blown, circuit breaker
tripped.
Extension cord is wrong
length or gauge.
Faulty motor.
1. Check fuse box for blown
fuse and replace as
necessary. Reset circuit
breaker. Do not use a fuse
or circuit breaker with
higher rating than that
specified for your
particular branch circuit.
2. Check for proper fuse.
You should be using a
"Time Delay" fuse.
3. Check for low voltage
problem.
4. Check the extension cord.
5. Disconnect the other
electrical appliances from
circuit or operate the
inflator on its own branch
circuit.
Check the extension cord.
Contact a Trained Service
Technician.
15- ENG
CORRECTION
D29496