Craftsman 919.722010 Owner's Manual page 12

How to use High Flow
Inflator/Deflator Adapter Body
1. Place the universal valve adapter
over high flow inflator/deflator
adapter body as shown.
2. Press lever on universal valve
adapter down to lock in place.
3. Choose nozzle to be used to
inflate or deflate. NOTE: The seal
ring may be used with any of the
nozzles to prevent air from leaking
out of inflatables with very large air
inlets.
4. The high flow inflate/deflate
adapter body attachment has an
"inflation" outlet and "deflation"
outlet. Attach the nozzle to the
preferred outlet. NOTE:
"Inflation" and "Deflation" are
marked at outlets.
Nozzle
attached to
"deflation"
outlet
D29496
Nozzle
attached to
"inflation"
outlet
5. Insert nozzle into inflatable and
then start inflator, see "How to
Start" paragraph.
NOTE: If inflatable is not getting firm
enough, place thumb over the
"deflation" outlet to allow air to go
directly into the inflatable.
inflate. Keeping thumb over
"Deflation" outlet could cause
inflatable to over-inflate. Use
caution when placing thumb over
"Deflation" outlet.
12- ENG
Risk of Bursting.
DO NOT over-