Craftsman 919.727130 Owner's Manual
Craftsman 919.727130 Owner's Manual

Craftsman 919.727130 Owner's Manual

Permanently lubricated tank mounted air compressor
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Model No.
919.727130
IMPORTANT:
Read the Safety Guidelines
and All Instructions Carefully
Before Operating
D20982 Rev. 0 5/3/00
OWNERS MANUAL FOR
CRAFTSMAN
PERMANENTLY LUBRICATED
TANK MOUNTED
AIR COMPRESSOR
• SAFETY GUIDELINES
• ASSEMBLY
• OPERATION
• MAINTENANCE
• TROUBLESHOOTING
• REPAIR PARTS
Sold by Sears Canada, Inc., Toronto, Ont. M5B 2B8
Record in the spaces provided.
(1) The Model Number can be found on the
maintenance label on top of the motor
shroud or on the bar code label on the
rear of air tank.
(2) The Date Code Number can be found on
the bar code label on the rear of the air
tank.
(3) The Serial Number can be found on the
bar code label on the rear of the tank.
(4) The Tank Registration Number is located
on the metal data plate which is welded
onto the backside of the air tank. (This
data plate is painted the same color as
the tank.)
Retain these numbers for future reference.
Model No_______________________________
Serial No_______________________________
Date Code______________________________
Tank Registration No____________________

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 919.727130

  • Page 1 OWNERS MANUAL FOR CRAFTSMAN PERMANENTLY LUBRICATED Model No. TANK MOUNTED 919.727130 AIR COMPRESSOR Record in the spaces provided. (1) The Model Number can be found on the maintenance label on top of the motor • SAFETY GUIDELINES shroud or on the bar code label on the rear of air tank.
  • Page 2: Table Of Contents

    If this air compressor is used for commercial or rental purposes, the warranty will apply for ninety days (90) from the date of purchase. This Craftsman Air Compressor warranty gives you specific legal rights and you may have other rights which vary from province to province.
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY AND PROPERTY DAM- AGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. HAZARD RISK OF EXPLOSION OR FIRE WHAT CAN HAPPEN HOW TO PREVENT IT IT IS NORMAL FOR ELECTRICAL CONTACTS WITHIN THE...
  • Page 4: Risk To Breathing

    HAZARD RISK FROM FLYING OBJECTS WHAT CAN HAPPEN HOW TO PREVENT IT THE COMPRESSED AIR STREAM CAN CAUSE SOFT TISSUE ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY GLASSES WITH DAMAGE TO EXPOSED SKIN AND CAN PROPEL DIRT, CHIPS, SIDE SHIELDS WHEN USING THE COMPRESSOR. LOOSE PARTICLES AND SMALL OBJECTS AT HIGH SPEED, NEVER POINT ANY NOZZLE OR SPRAYER TOWARD ANY PART RESULTING IN PROPERTY DAMAGE OR PERSONAL INJURY.
  • Page 5: Risk From Moving Parts

    HAZARD RISK FROM MOVING PARTS WHAT CAN HAPPEN HOW TO PREVENT IT MOVING PARTS SUCH AS THE PULLEY, FLYWHEEL AND BELT NEVER OPERATE THE COMPRESSOR WITH GUARDS OR CAN CAUSE SERIOUS INJURY IF THEY COME INTO CONTACT COVERS WHICH ARE DAMAGED OR REMOVED. WITH YOU OR YOUR CLOTHING.
  • Page 6: Glossary

    "Auto", the motor will restart automatically. The low pressure at which the motor automatically restarts is called “cut- in pressure.” SPECIFICATION CHART Model No. 919.727130 Bore 1 7/8" Stroke 1 1/4" Voltage - Single Phase...
  • Page 7: Description Of Operation

    DESCRIPTION OF OPERATION Air Compressor Pump: To compress air, the piston Safety Valve: If the pressure switch does not shut moves up and down in the cylinder. On the down- off the air compressor at its cut-out pressure setting, stroke, air is drawn in through the air intake valves. the safety valve will protect the tank against high The exhaust valves remain closed.
  • Page 8: Assembly

    ASSEMBLY Installing Wheels, Handles, Molded Foot Bumpers It will be necessary to brace or support one side of the outfit when installing the wheels because the compressor will have a ten- THE WHEELS AND HANDLE DO NOT dency to tip over. PROVIDE ADEQUATE CLEARANCE, 2.
  • Page 9: Grounding Instructions

    GROUNDING INSTRUCTIONS If repairing cord or plug, the grounding wire must be kept separate from the current-carrying wires. Never connect the grounding wire to a flat blade plug terminal. The grounding wire has insulation with an RISK OR ELECTRICAL SHOCK. In the event outer surface that is green - with or without yellow of a short circuit, grounding reduces the risk stripes.
  • Page 10: Operating Procedures

    OPERATING PROCEDURES 1. Before attaching air hose or accessories, make 6. Always operate the air compressor in well-venti- sure the OFF/AUTO lever is set to “OFF” and the lated areas; free of gasoline or other solvent air regulator is closed. vapors.
  • Page 11: Maintenance

    MAINTENANCE UNIT CYCLES AUTOMATICALLY WHEN POWER IS ON. WHEN DOING MAINTENANCE, YOU MAY BE EXPOSED TO VOLTAGE SOURCES, COMPRESSED AIR OR MOVING PARTS. PERSONAL INJURIES CAN OCCUR. BEFORE PERFORMING ANY MAINTENANCE OR REPAIR, UNPLUG THE COMPRESSOR AND BLEED OFF ALL AIR PRESSURE. ALL MAINTENANCE AND REPAIR OPERATIONS NOT LISTED MUST BE DONE BY QUALIFIED SERVICE PERSONNEL.
  • Page 12: Troubleshooting Guide

    TROUBLESHOOTING GUIDE PERFORMING REPAIRS MAY EXPOSE VOLTAGE SOURCES, MOVING PARTS OR COMPRESSED AIR SOURCES. PERSONAL INJURY MAY OCCUR. PRIOR TO ATTEMPTING ANY REPAIRS, UN- PLUG THE COMPRESSOR AND BLEED OFF TANK AIR PRESSURE. PROBLEM CAUSE CORRECTION Pressure switch does not shut off Move the pressure switch lever to the “OFF”...
  • Page 13 TROUBLESHOOTING GUIDE (Continued) CORRECTION PROBLEM CAUSE Operate safety valve manually by pulling on ring. If Air leak from safety valve. Possible defect in safety valve. valve still leaks, it should be replaced. Defective check valve. Have checked at local Sears Service Center. Knocking Noise Compressor is not supplying Prolonged excessive use of air.
  • Page 14: Air Compressor Diagram

    AIR COMPRESSOR Model No. The model number of your Sears Air Compressor can be found 919.727130 on the maintenance label on the top of the shroud or on the bar code label on the rear of the air tank. SERVICE...
  • Page 15 GUIDE DE L’UTILISATEUR POUR LE COMPRESSEUR D’AIR À LUBRIFICATION PERMANENTE MONTÉ SUR RÉSERVOIR DE CRAFTSMAN Modèle n 919.727130 Inscrivez dans l’espace réservé à cette fin 1) Le numéro du modèle se trouve sur l’étiquette d’entretien qui est sur le dessus du carter du moteur ou sur l’étiquette de caractères à...
  • Page 16 à des fins commerciales ou comme appareil de location Cette garantie sur le compresseur d'air de Craftsman vous donne des droits particuliers. Il se peut que vous ayez d’autres droits qui varient d’une province à l’autre.
  • Page 17: Mesures De Sécurité

    MESURES DE SÉCURITÉ IMPORTANTES CONSERVER CES DIRECTIVES AVERTISSEMENT UN EMPLOI OU UN ENTRETIEN NON APPROPRIÉS DE CE PRODUIT PEUT CAUSER DES BLESSURES GRAVES ET DES DOMMAGES À LA PROPRIÉTÉ. LIRE ATTENTIVEMENT TOUS LES AVERTISSEMENTS ET LES DIRECTIVES D’UTILISATION AVANT D’UTILISER CET APPAREIL.
  • Page 18 DANGER RISQUE DE PROJECTION D’OBJETS RISQUE PRÉVENTION LE JET D’AIR COMPRIMÉ PEUT CAUSER DES LÉSIONS AUX TISSUS DE LA PORTER TOUJOURS DES LUNETTES DE PROTECTION HOMOLOGUÉES PEAU EXPOSÉE ET PEUT PROJETER DE LA SALETÉ, DES COPEAUX, DES ANSI Z87.1 AVEC DES ÉCRANS LATÉRAUX LORS DE L’UTILISATION DU PARTICULES LIBRES ET DE PETITS OBJETS À...
  • Page 19 DANGER RISQUE RELIÉ AUX PIÈCES MOBILES RISQUE PRÉVENTION LES PIÈCES MOBILES TELLES QUE LA POULIE, LE VOLANT-MOTEUR ET LA NE JAMAIS FAIRE FONCTIONNER LE COMPRESSEUR SANS LES COURROIE PEUVENT ENTRAÎNER DES BLESSURES GRAVES SI ELLES GARDES OU LES COUVERCLES OU LORSQUE CEUX-CI SONT ENTRENT EN CONTACT AVEC UNE PARTIE DU CORPS OU DES ENDOMMAGÉS.
  • Page 20: Renseignements Généraux

    RENSEIGNEMENTS GÉNÉRAUX Vous avez fait l’achat d’un compresseur d’air de 1 cylindre Votre compresseur d’air peut être utilisé avec des pistolets à muni d’une pompe de compresseur d’air à phase unique et peindre, des outils pneumatiques, des pistolets à calfeutrer, d’un réservoir d’air.
  • Page 21: Description Du Mode Opérationnel

    DESCRIPTION DU MODE OPÉRATIONNEL Pompe du compresseur d’air : Pour comprimer l’air, le Soupape de sûreté : Si le manostat ne coupe pas le piston se déplace de haut en bas dans le cylindre. A la compresseur d’air lorsqu’il atteint la valeur établie de la descente, l’air entre dans les soupapes d’admission d’air.
  • Page 22: Assemblage

    ASSEMBLAGE Installation des roues, poignées et butoirs moulés en caoutchouc Il peut être nécessaire de soutenir ou de consolider une extrémité de l’appareil lors de la fixation des roues en raison de la tendance à LES ROUES ET LA POIGNÉE N’OFFRENT PAS basculer du compresseur.
  • Page 23: Directives De Mise À La Terre

    Lors de la réparation ou du remplacement du cordon ou de DIRECTIVES DE MISE A LA TERRE la fiche, le fil de terre doit être tenu séparé des fils conducteurs d’électricité. Ne branchez jamais le fil de terre à une borne plate. Le fil de terre est recouvert d’une gaine RISQUE DE CHOC ÉLECTRIQUE ! En cas de isolante dont la surface externe est verte - avec ou sans court-circuit, la mise à...
  • Page 24: Procédures Opérationnelles

    PROCÉDURES OPÉRATIONNELLES Avant d’attacher le boyau d’air ou autres accessoires, 6. Faites toujours fonctionner le compresseur d’air dans assurez-vous que l’interrupteur arrêt/auto (OFF/AUTO) un endroit bien ventilé, libre de toutes vapeurs est en position d’arrêt (OFF) et que le régulateur d’air d’essence ou d’autre solvants.
  • Page 25: Entretien

    ENTRETIEN L’APPAREIL SE MET AUTOMATIQUEMENT EN MARCHE LORSQU’IL EST ALLUMÉ. AU COURS DE L’ENTRETIEN, IL SE PEUT QUE VOUS SOYEZ EXPOSÉ AUX SOURCES DE TENSION, À L’AIR COMPRIMÉ OU AUX PIÈCES MOBILES RISQUANT AINSI DES BLESSURES. DÉBRANCHEZ L’APPAREIL ET VIDANGEZ TOUTE LA PRESSION DANS LE RÉSERVOIR D’AIR AVANT D’ENTAMER TOUT ENTRETIEN OU TOUTE RÉPARATION.
  • Page 26: Guide De Dépannage

    GUIDE DE DÉ PANNAGE EN EFFECTUANT DES RÉPARATIONS IL SE PEUT QUE VOUS SOYEZ EXPOSÉ AUX SOURCES DE TENSION, AUX PIÈCES MOBILES OU AUX SOURCES D’AIR COMPRIMÉ RISQUANT AINSI DES BLESSURES. DÉBRANCHEZ LE COMPRESSEUR ET VIDANGEZ TOUTE LA PRESSION DANS LE RÉSERVOIR D’AIR AVANT D’ENTAMER TOUTE RÉPARATION.
  • Page 27 PROBLÈME CORRECTION CAUSE Fuite d’air à la soupape de Possibilité d’une défectuosité de la Faites fonctionner la soupape de sûreté sûreté. manuellement en tirant sur l’anneau. Si la soupape soupape de sûreté. accuse toujours une fuite, remplacez-la. Cognements. Faites vérifier par le Centre de service Sears de Soupape de retenue défectueuse votre localité.
  • Page 28: De Pièces De Rechange

    À LUBRIFICATION PERMANENTE MONTÉ SUR RÉSERVOIR Modèle n 919.727130 Le numéro du modèle de votre Compresseur d’air de Sears se trouve sur l’étiquette d’entretien située au-dessus du boîtier ou sur l’étiquette de caractères à bâtonnets située à l’arrière du réservoir d’air.

Table of Contents