DeWalt DCH363 Instruction Manual page 11

wool, aluminum foil, or any buildup of metallic particles should be
kept away from charger cavities. Always unplug the charger from
the power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean.
6. Do not freeze or immerse charger in water or any other liquid.
WARNING: Shock hazard. Don't allow any liquid to get inside
charger. Electric shock may result.
WARNING: Burn hazard. Never attempt to open the battery pack
for any reason. If the plastic housing of the battery pack breaks or
cracks, return to a service center for recycling.
Storage Recommendations
1. The best storage place is one that is cool and dry away from
direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool dry place out of the charger for optimal
results.
NOTE: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
COMPONENTS (Fig. 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Side handle
B. Trigger switch
C. Forward/reverse control
button (Lock-off button)
D. Mode selector
E. Main handle
F. Depth rod
G. Dust extraction port (for
use with D25302DH—sold
separately)
FIG. 2
H
F
D
J
A
I
Side Handle (Fig. 2)
WARNING: To reduce the risk of personal injury, ALWAYS operate
the tool with the side handle properly installed and securely tightened.
Failure to do so may result in the side handle slipping during tool
operation and subsequent loss of control. Hold tool with both hands
to maximize control.
A side handle comes assembled with this rotary hammer. The side
handle (A) can be fitted to suit both right-hand and left-hand users.
TO ADJUST THE SIDE HANDLE
1. Loosen the side handle (A) by turning it counterclockwise.
9
C
E
B
G