Maintenance; Service Information - Black & Decker RD1440 Instruction Manual

611193-00 Rd1440 drill manual
The cutting lubricants that work best
are sulfurized cutting oil or lard oil.
DRILLING IN MASONRY
Use carbide tipped masonry bits. Refer
to Drilling section. Keep even force on
the drill but not so much that you crack
the brittle material. A smooth, even
flow of dust indicates the proper
drilling rate.

Maintenance

Use only mild soap and damp cloth to
clean the tool. Never let any liquid get
inside the tool; never immerse any part
of the tool into a liquid.
IMPORTANT: To assure product
SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other
than those listed in this manual)
should be performed by authorized
service centers or other qualified
service organizations, always using
identical replacement parts.
The RBRC™ Seal
The RBRC™ (Rechargeable
Battery Recycling
Corporation)
Seal on the nickel-cadmium
battery (or battery pack) indicates that
the costs to recycle the battery (or
battery pack) at the end of its useful
life have already been paid by Black &
Decker. In some areas, it is illegal to
place spent nickel-cadmium batteries
in the trash or municipal solid waste
stream and the RBRC program
provides an environmentally conscious
alternative.
RBRC in cooperation with Black &
Decker and other battery users, has
established programs in the United
States and Canada to facilitate the
collection of spent nickel-cadmium
batteries. Help protect our
environment and conserve natural
resources by returning the spent
nickel-cadmium battery to an
authorized Black & Decker service
center or to your local retailer for
recycling. You may also contact your
local recycling center for information
on where to drop off the spent battery,
or call 1-800-8-BATTERY.
Accessories
Recommended accessories for use with
your tool are available from your local
dealer or authorized service center. If
you need assistance regarding
accessories, please call:
1-800-544-6986.
WARNING: The use of any
7/16/02 3:54 PM Page 9
accessory not recommended for use
with this tool could be hazardous.
The following accessories should be
used only in the sizes specified below:
BITS, METAL DRILLING – Up to 3/8"
(9.5mm); BITS, MASONRY DRILLING
– Up to 3/8" (9.5mm); WOOD
DRILLING – Up to 1/2" (12.7mm).

Service Information

All Black & Decker Service Centers are
staffed with trained personnel to
provide customers with efficient and
reliable power tool service. Whether
you need technical advice, repair, or
genuine factory replacement parts,
contact the Black & Decker location
nearest you. To find your local service
location, refer to the yellow page
directory under "Tools—Electric" or
call: 1-800-54-HOW TO. (544-6986)
Full Two-Year Home Use
Warranty
Black & Decker (U.S.) Inc. warrants
this product for two years against any
defects in material or workmanship.
The defective product will be replaced
or repaired at no charge in either of two
ways.
The first, which will result in
exchanges only, is to return the product
to the retailer from whom it was
purchased (provided that the store is a
participating retailer). Returns should
be made within the time period of the
retailer's policy for exchanges (usually
30 to 90 days after the sale). Proof of
purchase may be required. Please
check with the retailer for their specific
return policy regarding returns that
are beyond the time set for exchanges.
The second option is to take or send the
product (prepaid) to a Black & Decker
owned or authorized Service Center for
repair or replacement at our option.
Proof of purchase may be required.
Black & Decker owned and authorized
Service Centers are listed under "Tools-
Electric" in the yellow pages of the
phone directory.
This warranty does not apply to
accessories. This warranty gives you
specific legal rights and you may have
other rights which vary from state to
state. Should you have any questions,
contact the manager of your nearest
Black & Decker Service Center.
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
9
Imported by