DeWalt DCT419 Instruction Manual page 4

performed. Use of the hand-held wall scanner for operations
different from those intended could result in a hazardous
situation.
Battery Tool Use and Care
a) Recharge only with the charger specifi ed by D
charger that is suitable for one type of battery pack may create
a risk of fi re when used with another battery pack.
b) When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fi re.
c) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
fl ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Safety Information for Hand-Held Wall
Scanners
WARNING: Do not disassemble or modify the hand-held wall
scanner. There are no serviceable parts inside. If you need
assistance, contact D WALT at 1-800-4-D
E
or go to http://www.dewalt.com on the Internet.
• Do not operate the hand-held wall scanner in explosive
atmospheres, such as in the presence of fl ammable liquids,
gases, or dust. Hand-held wall scanners create sparks which may
ignite the dust or fumes.
• The hand-held wall scanner should only be used with
specifi cally designated D WALT batteries. Use of any other
E
batteries may create a risk of fi re.
• Store the hand-held wall scanner out of reach of children
and other untrained persons. Tools are dangerous in the hands
of untrained users.
• Do not disassemble the hand-held wall scanner. There are no
user serviceable parts inside.
WALT. A
E
• Do not remove or deface warning labels.
• The hand-held wall scanner must remain in contact with the
wall surface during the entire scan.
• Optimal operation of the hand-held wall scanner is possible
only when the operating instructions are read and followed.
• Do not attach any stickers on name plates to the sensor
area on the back of the hand-held wall scanner. Metal stickers
especially could affect the measurement results.
• Before turning on the hand-held wall scanner, ensure that its
back surface is not moist. If required, wipe with a dry cloth before
scanning.
• Do not expose to extreme temperatures or variations in
temperature. In case of large variations in temperature, allow
the unit to adjust to ambient temperature before powering
on. Extreme and variations in temperature can impair the display
and accuracy of the tool.
• Static electricity may lead to inaccurate detection of
electrical wires.
WALT (1-800-433-9258)
E
WARNING: Do not expose hand-held wall scanner or battery
to excessive heat such as sunshine, fi re or the like.
WARNING: Modifi cations not authorized by the manufacturer
may void user's authority to operate this device.
WARNING: The detector alone should not be relied on
exclusively to locate items below the scanned surface. Under
certain circumstances, the scanner may not identify all objects or
the exact location of objects. Use other information sources to help
locate items before penetrating the surface. Such additional sources
include construction plans, visible points of entry of pipes and wiring
2