Battery Low - DeWalt DCT419 Instruction Manual

SCANNING TOO SLOW
If the scanning speed is below the minimum processing speed of the
hand-held wall scanner, the following error message will appear:
Remove the hand-held wall scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held wall scanner on the wall to restart the scan.

BATTERY LOW

If the 12V Max* battery pack is about to run out of charge, the following
error message will appear:
Replace or recharge the 12V Max* battery pack.
LOST CONTACT WITH THE WALL SURFACE
If the hand-held wall scanner loses contact with the wall surface, the
following error message will appear:
Remove the hand-held wall scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held wall scanner on the wall to restart the scan.
MAXIMUM DISTANCE EXCEEDED
The hand-held wall scanner has a maximum scanning range of 9.8 feet
(3 meters). During pre-scan mapping, if the distance scanned exceeds
the maximum distance, the following error message will appear:
Remove the hand-held wall scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held wall scanner on the wall to restart the scan.
15