Maintenance; Service Information; Protecting The Environment - Black & Decker Linea PRO KD975 Instruction Manual

maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
Tighten the side handle by turning the grip clockwise.
u
SWITCHING ON AND OFF
To switch the tool on, press the variable speed switch
u
(1). The tool speed depends on how far you press the
switch. Set the variable speed control knob (4) to the
required speed range.
Use speeds 1-6 for short periods only.
u
As a general rule, use low speeds for large diameter
u
drill bits and high speeds for smaller diameter drill
bits.
For continuous operation, press the lock-on button (2)
u
and release the variable speed switch. This option is
available only in forward (clockwise) rotation.
To switch the tool off, release the variable speed
u
switch. To switch the tool off when in continuous
operation, press the variable speed switch once more
and release it.
ACCESSORIES
The performance of your tool depends on the accessory
used. Black & Decker accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories
you will get the very best from your tool.

MAINTENANCE

Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
WARNING: Before performing any maintenance, switch off
and unplug the tool.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.

PROTECTING THE ENVIRONMENT

Separate collection.
This product must not be disposed of with
normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned
and authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. Whether you
need technical advice, repair, or genuine factory replacement
parts, contact the Black & Decker location nearest you.
Technical data
Voltage V
AC
AR
B2C
B3
B2
BR
Power input
No-load speed mín
Impact rate mín
Impact energy J
Max. drilling capacity
Concrete mm 24
Steel mm 13
Wood mm 30
Weight kg
ENGLISH
KD975KA KD990KA
220V ~ 50Hz 220V ~ 50Hz
220V ~ 50-60Hz 220V ~ 50-60Hz
120V ~ 60Hz 120V ~ 60Hz
220V ~ 60Hz 220V ~ 60Hz
127V ~ 60Hz 127V ~ 60Hz
700W 800W
0 - 980 0 - 980
-1
0 - 5180 0 - 5180
-1
2,0 2,4
26
13
30
3.4 3.4
17