D-Link DIR-514 User Manual page 42

Section 3 - Configuration
The Admin page allows you to change the Administrator password and enable Remote Management. The admin has read/write access
while users only have read-only access. Only the admin has the ability to change both admin and user account passwords. After modifying
any settings, click Save Settings to save your changes.
ADMINISTRATOR
Admin Password:
Enter and confirm the password that the admin account
will use to access the router's management interface.
REMOTE MANAGEMENT
Remote Management:
Tick this check box to enable remote management.
Remote management allows the DIR-514 to be
configured over the Internet through a web browser.
A username and password will still be required
to access the Web-Management interface.
IP Allowed to Access:
Enter the Internet IP address of the PC that has access
to the Broadband Router. If you enter an asterisk (*)
in this field, then anyone will be able to access the
Router. Adding an asterisk (*) into this field could
present a security risk and is not recommended.
Port:
This is the port number used to access the router. 8080 is
the port usually used for the Web-Management interface.
D-Link DIR-514 User Manual
Admin
40