Do you have a question about the TH420 and is the answer not in the manual?
Questions and answers
Franklin Delano Conaway
February 18, 2025
how are the gas lines configured? there are two lines on top of the tank. One has a roundish part on the end of it with a tube connected nto it that goes down in the tank. Im guessing its a fuel pick up tube however the other line is the one with the fuel filter in line with it. the line that has the tube on it is broken it appears to be broken off the top of the gas tank i bought the machine this way and trying to figure out if this is why it wont start the gentalmen i purchased it from says this is all thats wrong with it
1 comments:
Mr. Anderson
February 18, 2025
The provided context does not contain specific details on the gas line configuration for the Bush Hog TH420. However, the troubleshooting section lists "No fuel in tank" and "Fuel filter clogged" as possible reasons the engine won't start. A broken fuel pickup tube could prevent fuel from reaching the engine, which might cause starting issues, but this is not explicitly mentioned in the document.
Need help?
Do you have a question about the TH420 and is the answer not in the manual?
Questions and answers
how are the gas lines configured? there are two lines on top of the tank. One has a roundish part on the end of it with a tube connected nto it that goes down in the tank. Im guessing its a fuel pick up tube however the other line is the one with the fuel filter in line with it. the line that has the tube on it is broken it appears to be broken off the top of the gas tank i bought the machine this way and trying to figure out if this is why it wont start the gentalmen i purchased it from says this is all thats wrong with it
The provided context does not contain specific details on the gas line configuration for the Bush Hog TH420. However, the troubleshooting section lists "No fuel in tank" and "Fuel filter clogged" as possible reasons the engine won't start. A broken fuel pickup tube could prevent fuel from reaching the engine, which might cause starting issues, but this is not explicitly mentioned in the document.
This answer is automatically generated